Microcement
Fine
![](https://www.ingremic.com/wp-content/uploads/iconos-producto-microcement.png)
The MicroFine is a decorative coating of 1 to 2 mm thick, made of a mixture of polymer additives and quality cement. Recommended for interior walls and surfaces without transit. Fine microcement of Ingremic.
One of the great features that this smooth microcement has is its elegance and aesthetics appeal. It creates an avant-garde atmosphere and is very easy to clean.
It is not necessary to raise the existing surface, which facilitates reform by making it very convenient and more economical.
![](https://www.ingremic.com/wp-content/uploads/microfine_ingremic.jpg)
More Information
Data Sheet
PRODUCT DETAILS
The MicroFine is a cementitious coating polymer additives 1 to 2 mm thick. Layers applied by trowel and spatula. Finish very fine and rare for interior walls and floors of little foot traffic.
PROPERTIES
- Does not require seals, thus generating sensations of spaciousness and cleanliness, in turn facilitating this.
- No need to lift the existing surface, being very practical, cost-effective and relatively atraumatic reforms.
- Its huge variety of colors allows adaptation and harmony with the desired atmosphere.
- The approximate 1 to 2 millimeters thick shall not establish a visual impact on the coated surfaces or technical problems with frames and cover plates for doors and windows.
- Forms may be coated or solid figures look so integrated with the walls.
RECOMMENDED USE
The physical characteristics of microfine as adhesion and impermeability allowed to be applied:
- Interior walls.
- Flooring little foot traffic as toilets, shower trays and bathtubs.
- Walls of kitchens, furniture, islands, sinks, doors and work tables or DM repellent.
- False ceilings.
TECHNICAL CHARACTERISTICS
Presentation: | Two-component: Component “A” and component cementitious powder “B” liquid polymer. |
Density (20º C): | Component A: 1,212 kg / l approx. Component B: 0.951 kg / l approx. |
Solubility: | Partially soluble in water. |
Finished: | Bright, glossy or matte. |
Dry Time 20 ºC & 65% H.R: | Touch about 60/90 minutes. It may vary with the porosity of the base. |
Application time between layers: | 2 hours minimum. It may vary with the porosity of the base. |
Working time: | Approximately 25/45 minutes. It may vary with environmental factors of temperature and relative humidity. |
Smell: | Slight odor. |
Useful life: | 1 year from the date of production in sealed container. |
Storage: | Indoor retain at temperatures between 10 and 35. Store, tightly closed and separated from the floor dry and cool packaging. |
Packaging: | 12.5 kg plastic pails and 25 kg. |
PREPARATION OF THE BASE AND APPLICATION OF THE PRODUCT
Tools: Trowel, spatula, brush, roller, trowel sponge mixer. Performance: Approximately 1.9 to 2.2 m² / kg by layer depending on the type of base and irregularity. Preparation of the base:
- The base to be coated must be clean, dry and free of dust and grease.
- The base must be level or smoothed.
- The foundations of concrete or mortar must be completely cured.
- In very porous base primer liquid prior microcement recommended in the ratio 1 part of component A and 1 part of component B, applied by roller.
- The base tile with a minimum of movement must be pre-treated glass fiber mats or in some cases with resins and aggregates to minimize movements. If the move is significant it is recommended to take the piece and fill flush with elastic mortar.
Product preparation:
- Make a mixture of component “A” dust from 2.8 to 3.0 parts and component “B” liquid to 1 part, always adding to the vessel liquid first and then slowly pouring the powder go without while mixing with propeller until a homogeneous paste is manageable with level becomes.
Application:
- If the device is to point trowel and spatula on the surface to be coated.
- The application of 2 layers MicroFine required.
- Should be sanded between coats and vacuum the dust before an upcoming issue.
- After the last layer applied MicroFine should allow between 12 and 16 hours to proceed to the final cut, then fine should aim reviewing the entire surface with sandpaper defects previously unseen.
- To proceed with the sealing is essential to respect the drying times are MicroFine 24 hours.
- Apply the first coat of sealer with sponge talocha diluting with water at a ratio of 1×1, the following layers of sealant are applied pure, with short nap roller finally wax is applied with a sponge trowel. The type and amount of sealant layers of sealant and wax applied depend spaces or areas to be coated and if zone in contact with water. This information is provided by the skilled artisan or by the Technical Instructions.
- Do not apply sealants or waxes at temperatures below 10 ° C and avoid applications with relative humidity greater than 80%.
Cleaning of tools: With water immediately after the application is finished. Recommendations for care and cleaning of the product already installed:
- Clean the surface with any neutral pH soap and maintainer be possible to use acrylic wax residue diluted with water (do not use the maintainer in areas with direct contact with water). It is using a mop or mop that is recommended.
- The spots must be removed only with water, detergent or soap.
- Clean all liquids before they dry.
- Place a doormat at the entrance.
- Keep the free surface of gravel.
- Do not drag furniture or sharp objects and protect the gums chair legs.
- Do not use solvents or materials that can damage the surface.
Periodic maintenance:
- Conduct regular maintenance with sealant or wax as spaces or surfaces that have been coated, the maintenance varies whether inside or outside, if floor or wall or if you have contact with water or not. This information is provided by the skilled artisan or by the Technical Instructions.
PERSONAL PROTECTIVE EQUIPMENT AND PRECAUTIONS
- Suitable gloves resistant protection.
- Safety boots when handling and applying the product.
- Knee for use in floor or surface where the legs support.
- Safety glasses with side shields for protection mixing process.
- Barbijo dust in the sanding process.
- Avoid prolonged skin contact.
- Do not eat.
- Keep out of reach of children.
- This product is for professional use only.
QUALITY GUARANTEE
IngreMic, S.L. ensures the quality of their product including the care and beautification, provided that they respect and follow the instructions in this sheet. These instructions are for the present state of our knowledge and provide general information about the application and features of our product. conducting technical visits are recommended before starting a job to see the status of the bases and the viability of the project. In cases of doubt consult our technical service.
Security Files
SECURITY FILE
According to Royal Decree 255/2003 of 28 February. (BOE 03/04/2003) Revision No. 2, February / 2004
1. – Product
Certified designation market | UNE-EN 197-1 |
Portland cement with limestone, CEM II / A-LL 32.5 N | CEM II / A – LL |
White Portland Cement BL II / A- LL 52.5 R | CEM II / A-LL |
1.2 Product Use: Manufacturing microcement 1.3 Company identification: IngreMic S.L. Barcelona Road 278, Local 08210 Barbera del Valles Phone: 913 779 200 1.4 Contact: 931 817 228 Showroom IngreMic Emergencies: 915 62 April 20 National Institute of Toxicology
2. – Product composition / characteristics of the components:
Microcemento is composed of cement clinker and other components in different proportions by weight according to the following table UNE-EN 197-1: 2000 The main components in addition to clinker must be declared in the designation of the cement (I see section 8). And also with the required amount of calcium sulphate to regulate the setting, so that the S03 content in the cement does not exceed 4.5% COMPOSITION BL 22.5 X UNE 80305: 2001; at least 40% of cement clinker, a maximum of 1% of organic matter, if any, and other inorganic materials. Components:
- Clinker: EINECS 266-043-4 (NºC.A.S. 65997-15-1) is composed mainly of silicate, calcium aluminate and ferritoaluminato small amounts of free lime, magnesium oxide, sodium, potassium and calcium sulfate.
- pozzolan.
- siliceous fly ash (C.A.S. No. 68131-74-8)
- steel slag (C.A.S. No. 65996-69-2)
- limestone, and
- calcium sulfate: as gypsum (NºC.A.S. 10101-41-4)
3.- Hazards Identified:
3.1. Classification of the preparation Irritant (Xi) 3.2. Main hazards to human health
Skin contact:
- Dry Microcemento:
It can cause skin dryness followed by mild irritation
- Microcemento in contact with moist skin or cement mixed with water:
May cause more severe skin effects including skin cracking. Longer exposure can cause more severe effects in the form of caustic burns due to its high pH
Eye contact:
- Dry cement sparingly
It can cause mild eye irritation
- Cement dry lot or projections of cement mixed with water:
They can cause effects ranging from moderate eye irritation to caustic burns.
Inhalation: Inhaling cement dust beyond the permissible limits environmental exposure may cause irritation of the respiratory tract
Ingestion: Ingestion of this product is unlikely unless in the case of a deliberate act. Small dust intakes are not harmful but in significant quantities, can cause abdominal pain and / or irritation of the digestive tract.
3.3. Main dangers for the environment
The microcemento no particular risk to the environment, provided that the recommendations of paragraphs 7, 12 and 13 are respected.
4. First Aid:
Inhalation If a person has problems from inhaling large amounts of microcemento, you will be immediately transferred to a place outdoors. In case of respiratory arrest employ the method of cardiopulmonary resuscitation (CPR) Keep warm and at rest. Get medical attention as soon as possible.
Contact with skin If contact with the powder microcemento microcemento mixed with water or irritant, wash with water the affected part and if irritation persists seek medical advice.
Eye contact If the microcemento or cement mixed with water, gets into the eyes, avoid compression and the introduction of instruments to remove it. Flush with plenty of water and seek medical advice. Contact lenses should not be worn when working with this product unless adequate protection is used.
Ingestion: Do not induce vomiting and seek medical assistance. If the person is conscious give to drink plenty of water. Immediate medical attention required.
5. – Fire-fighting measures:
Microcemento is not flammable. Microcemento, in case of fire, does not limit the use of extinguishing agents.
6. – Measures in case of accidental spillage
6.1. Personal precautions: Avoid contact with eyes. Avoid contact with skin. Avoid breathing dust. If dust atmosphere microcemento use approved dust mask. Handle the product with waterproof gloves.
6.2. Precautions for environmental protection: No microcement pour into sewers and surface waters.
6.3. Cleaning methods: Do not clean microcemento sweeping or blowing, use an appropriate method to avoid raising dust. After setting, the cement can be vented as an inert residue. The water mixed with cement hardening takes 30 to 90 minutes.
7 – Handling and Storage:
7.1. Handling
- The supply of this material is carried in bulk in tanks that are downloaded subsequently closed or paper sacks big bags or silos.
- The silos for unloading the tanks must be equipped with a filtration system exhaust air.
- In the premises where the product is handled should ensure good ventilation.
- Avoid dust clouds during handling. If not wear glasses and approved dust mask.
- Avoid direct contact of cement with skin and mucous membranes.
- Observe good personal hygiene.
- Do not eat while handling the product.
7.2. Storage
- You do not need any special precautions for the safe storage bags protect paper from moisture to avoid breakage and subsequent spillage of the product.
- Keep out of the reach of children.
8 – Exposure controls:
8.1. Exposure limit values The current occupational exposure limits for cement are set by the Limit Values Daily environmental exposure as RD 374/2001 of 6 April: VLA / ED (8 hours) = 10 mg / m3. 8.2. Occupational exposure controls
Respiratory protection: In the presence of cement dust in the air using specific mask particles.
Skin protection: Wear waterproof gloves, for use in aqueous mixtures. Wear appropriate clothing adapted to the type of work and protect the skin from projections wet cement paste. When you have to work kneeling waterproof knee it is recommended.
Eye protection: Wear eye protection if approved risk of dust or projection of paste on the eyes.
9 – Physical and Chemical Properties:
General information:
- Appearance: White or gray powder.
- Odor:
Important health, safety and the environment:
- pH in aqueous solution between 11 and 13.5 basic
- Melting point:> 1000 ° C
- Absolute density: 2.8 to 3.2 g / cm 3 to 20 ° C
- Bulk density: 0.9 to 1.2 g / cm3 at 20 ° C
- Solubility in water: 1.5 g / l at 20 ° C
- Flash point: Not applicable
- Size: of the order of 20 to 30% fines <5 microns.
10. – Stability and reactivity:
Stability: The product is stable
Conditions to avoid: Moisture can cause the setting of the cement.
Materials to avoid: None
Hazardous decomposition products: None
11 – Toxicological information:
Inhalation: The cement may cause irritation of the respiratory tract. The cement may cause irritation of the nasal mucosa. In extreme cases there has been an erosion of the mucosa.
Ingestion: In case of significant ingestion, cement can cause irritation of the digestive tract, causing abdominal pain.
Skin contact: Cement may irritate the skin its aqueous solutions have a high pH and may even cause caustic burns to significant exposures.
Eye contact: If cement enters the eyes can cause conjunctivitis, irritation of the eyelids (blepharitis) and cause injury to the eyeballs.
Chronic skin disease: For prolonged unprotected, as fisurativas dermatitis lesions, ulcers, hyperkeratosis, usually in the fingers may occur.
12 – Ecological Information.
Ecotoxicity: Accidental cement spill in water can cause a rise in pH. The set cement is a stable material that fixes its compounds and makes them insoluble.
Mobility: None.
Persistence and degradability: None.
Bioaccumulation potential: None.
Other adverse effects: None.
13 – Disposal considerations:
The microcemento can be removed like other construction wastes and stored in compliance with the regulations.
14 – Transport information:
No dangerous goods according to transport regulations.
15 – Regulatory Information
Hazard Symbol: Xi (irritant)
Main components: cement.
R phrases:
R36 / 37/38: Irritating to eyes, respiratory system and skin.
S phrases: S2:
Keep out of reach of children.
S 24/25: Avoid contact with eyes and skin.
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37 / 39: Wear suitable gloves and eye protection / face protection.
16. – Other information:
It is your responsibility to take the appropriate protective measures. The information provided in this document is given according to the data available at the time of the review of the same.
Quality guarantee
IngreMic ensures the quality of their products including the care and embellishment, provided that it respects and it follows the instructions in the respective data sheets. In turn, we certify the excellent quality that the raw material uses and its components.
To do this, we do test and periodic essay tests all our materials, as well as quality control for all construction processes.
The working methods of our workers in the works conform to the technical requirements for reforms, according to the relevant technical standards. As well as the tools and machinery used both in the application, distribution and manufacturing.
We are a company focused on personalized service to the customer and therefore IngreMic guarantees the job done in a transparent manner.
Our showrooms and factories have all the necessary conditions to offer a personalized service and optimal care, offering maximum comfort and safety. We have an excellent technical team, continued decorative coatings experts who are on hand to advice on any proposal or doubt.
These instructions are for the present state of our knowledge and provide general information about our products and our company.
Elegance, quality and spaciousness
Its huge variety of colours allows adaptation and harmony with the desired surroundings. Its thickness does not generate visual impact on the coated surfaces or technical problems with the door and window frames. This microcement has a very fine and special finish for interior walls and floors with very little foot traffic. Forms or solid figures may be coated so that they look integrated into the walls.
The characteristics of this decorative coating such as adhesion and impermeability, make it be able to be applied on interior walls, bathrooms floors, showers, bathtubs, kitchen walls, doors, furniture, DM repellent and false ceilings.
Our color chart
-
microcemento ingremic color acero
-
microcemento ingremic color agreste
-
microcemento ingremic color amarillo polen
-
microcemento ingremic color amatista
-
microcemento ingremic color atracita
-
microcemento ingremic color arena
-
microcemento ingremic color arena caribe
-
microcemento ingremic color avellana
-
microcemento ingremic color azul cielo
-
microcemento ingremic color azul leal
-
microcemento ingremic color azul noche
-
microcemento ingremic color berengena
-
microcemento ingremic color blanco
-
microcemento ingremic color blanco fijo
-
microcemento ingremic color blanco niebla
-
microcemento ingremic color blanco roto
-
microcemento ingremic color blanco titanio
-
microcemento ingremic color chocolate
-
microcemento ingremic color ciruelo
-
microcemento ingremic color coco
-
microcemento ingremic gris
-
microcemento ingremic color gris acero
-
microcemento ingremic color gris cemento
-
microcemento ingremic color gris naval
-
microcemento ingremic color gris plomo
-
microcemento ingremic color gris tempestad
-
microcemento ingremic color gris topo
-
microcemento ingremic color gris versatil
-
microcemento ingremic color jotun piedra coral
-
microcemento ingremic color kenia
-
microcemento ingremic color malva
-
microcemento ingremic color mantecado
-
microcemento ingremic color marfil
-
microcemento ingremic color negro
-
microcemento ingremic color ocre
-
microcemento ingremic color perla
-
microcemento ingremic color perla paris
-
microcemento ingremic color plata
-
microcemento ingremic color purpura
-
microcemento ingremic color rojo ferrari
-
microcemento ingremic color rojo maya
-
microcemento ingremic color rosa natural
-
microcemento ingremic color sabia
-
microcemento ingremic color sahara
-
microcemento ingremic color sauce
-
microcemento ingremic color tejano
-
microcemento ingremic color terracota
-
microcemento ingremic color topacio
-
microcemento ingremic color tostado
-
microcemento ingremic color trigo
-
microcemento ingremic color verde alpe
-
microcemento ingremic color verde kaki
-
microcemento ingremic color verde pistacho
-
microcemento ingremic color verde sauce
-
microciment ingremic dry green color